Jumpguard Pro: The best-selling aquarium net screen cover
About Jumpguard PRO Net Screen Aquarium Cover
There's no worse nightmare than walking up to your aquarium in the morning and finding your favorite fish dead on the floor.
Many fish tend to jump when startled or chased by tankmates, making jump prevention one of the top priorities for any aquarist.
Jumpguard D-D Net Covers provide the ideal solution:
- Ultra-lightweight yet durable construction
- Low visual impact – barely noticeable
- Easy to assemble – fits most aquarium sizes
- Specialized design to prevent fish escapes while
- Maintaining high light penetration
Available in multiple sizes:
Comes in various sizes and can be custom-cut to fit any aquarium perfectly.
TC7575PRO - Standard Size 75 cm x 75 cm (29.5" x 29.5")
TC12075PRO - Standard Size 20 cm x 75 cm (47.2" x 29.5")
TC18075PRO - Standard Size 180 cm x 90 cm (70.9" x 35.4")
Design Note: Actual assembled frame extends 3.6 cm beyond listed dimensions on all sides.
Always take interior glass-to-glass measurements - external dimensions are inaccurate for fitting.
The Jumpguard aquarium screen is a kit that allows aquarists to create a custom frame for your specific aquarium. The rigid corners and extruded aluminum sections form a very sturdy frame, which sits carefully inside the aquarium, placed on the top edge.
Included Components
4× Aluminum frame sections
4× Plastic corner connectors
2× Plastic handle grips
1× Rubber spline cord (for mesh tensioning)
1× Transparent mesh netting
1× Spline roller tool
1× Assembly manual
1× Flexi-cut trimming tool
TC7575PRO: Reinforcement bar
TC12075PRO: Reinforcement bar set
TC18090PRO: Reinforcement bar set
NEW PROFILE DESIGN: The special extruded aluminum profile is now crafted with a lip that sits directly on the glass edge, eliminating the need for additional clamps or supports. The section is extruded and then powder-coated in a durable, low-sheen matte black for enhanced scratch resistance and superior aesthetics. The corner is easier to cut if you need to run wires behind the tank for pumps and heaters.
New Black Screen – Maximum Light Penetration:
For reef aquarium owners concerned about light loss, measurements taken with an Apogee MQ-200 meter showed the following results:
PAR without cover: ~390-400
PAR with cover: ~380-390
Light reduction: ~2.5% with no shadow formation
Jumpguard Accessories:
We offer a diverse range of accessories for Jumpguard frames, ensuring flexibility for various aquarium setups.
MULTI-CUTOUT Set – Includes 3 standard cutout solutions, adaptable for different openings or specific dimensions.
FLEXI-CUTOUT Set – Enables custom cutouts for overflow boxes, pipes, or larger lighting fixtures.
BRACE BAR Set – Provides extra reinforcement across the tank width, ideal for larger frames or multiple cutouts.
The MULTI-CUTOUT Set features 3 pre-designed cut options, allowing frame adjustments around lighting mounts, cables, or tubing.
Each kit contains:
1 pair of 15 mm offset corners
1 pair of 40 mm offset corners
1 x 40 mm x 120 mm lighting support or rigid cutout
Note: Cutting the standard square frame, especially in larger frames, will generally reduce rigidity, and we recommend installing one or more cross braces as needed to maintain structural integrity.
FLEXI-CUTOUT SET
The Jumpguard Flexi-cutout set provides 2 standard corners and 2 reverse corners to allow you to modify the frame around overflow boxes, lighting supports, cables, or larger pipes, etc., which would not be covered by the multi-piece set.
Each kit contains:
1 pair of standard corners
1 pair of reverse corners
Note: Cutting the standard square frame, especially in larger frames, will generally reduce rigidity, and we recommend installing one or more cross braces as needed to maintain structural integrity.
BRACE BAR SET
For larger aquariums or whenever a fitting set is adjusted, we recommend installing one or more reinforcement bars to maintain the frame's structural integrity and prevent outer edge warping.
Each kit includes:
2 x 900 mm x 12 mm x 8 mm reinforcement bars
2 x 6-piece connectors
Note: The reinforcement bar and the 6 clamps are already included with the TC18990 kit.
