The Hailea HC 130-A Chiller 

The HC 130-A is a compact, energy-efficient water chiller in Hailea’s HC series, designed for smaller aquariums or hydroponic systems. It balances modest power with precision and durability, making it a good choice when you need reliable temperature control but don’t have huge volume or extreme heat loads.

Technical Specs

• The nominal cooling capacity is 130 watts, which corresponds well to aquariums up to about 130 litres under typical conditions.

• It operates with a 1/15 horsepower (HP) compressor.

• The unit runs on 220-240 V, at 50 Hz frequency. Some listings suggest compatibility with 110-120 V / 60 Hz too, though this depends on the version.

• Current draw during operation is about 0.8 A.

• Recommended water flow rate is between 200 and 1000 litres per hour for efficient cooling performance.

• Suitable aquarium/system volume is in the range of 50-300 litres, though best performance is closer to the nominal 130 L mark under moderate conditions.

• The heat exchanger (evaporator) is made of pure titanium, which helps with corrosion resistance—important in saltwater or mixed environments.

• Refrigerant used is R-134a, which is more environmentally friendly than many older refrigerants.

• Physical weight is around 9.5 kg.

• Dimensions are approximately 338 × 218 × 325 mm (length × width × height).

• Inlet/outlet hose adaptors are around 13 mm in diameter.

Strengths of Hailea HC 130-A

• Compact size & lightweight makes it easier to install and integrate in smaller setups without needing a lot of space.

• Good corrosion resistance (thanks to titanium heat‐exchanger) makes it suitable for both freshwater and saltwater use.

• Low power draw and moderate current—efficiency is relatively good for its size.

• Precise digital temperature control allows stable, consistent regulation of temperature, which is critical for sensitive aquatic species or plant roots.

• Reasonable flow rate range (200-1000 L/h) gives flexibility in pump selection and plumbing designs.

• Lower noise design compared to many older chillers, so better for use in display areas or where noise is a concern.

Things to Watch Out For

• Because capacity is moderate, it may struggle or run continuously if ambient temperatures are high, or if lighting and other heat sources are strong.

• The nominal capacity (~130 L) means that if your actual system (tank + other components) is larger, performance will drop, or temperature control may be less steady.

• Flow rates must be maintained; if the pump or plumbing under-deliver, cooling efficiency will suffer.

• Heat build-up around the chiller (if ventilation is poor) will reduce performance and could increase wear.

• Even though the unit is relatively quiet and efficient, it still uses electricity, so running costs accumulate over time especially in warm climates or with constant operation.

Ideal Use Cases

• Aquariums of around 100-150 litres, especially in moderate climates where ambient temperature isn’t too high.

• Small reef tanks or planted tanks where temperature stability is important.

• Hydroponic or aquaponic systems of moderate scale, especially indoors or in grow rooms, where water temperature control helps with root health or fish health.

• Situations where space is limited, but you still need a chiller with good build quality and precision control.

• Users who want durability (titanium exchanger, quality construction) without needing industrial-scale cooling.

Conclusion

The Hailea Chiller Series combines powerful cooling performance with durable, corrosion-resistant construction, making it a dependable choice for both aquariums and hydroponic systems. With precise digital temperature control, efficient compressors, and quiet operation, these chillers maintain stable water conditions that protect sensitive fish, corals, and plants. Whether for a small setup or a large commercial installation, the Hailea range offers reliable, long-term temperature regulation and peace of mind for any water-based system.